|
|
 |
 DUST COLLECTOR APPLICATION TYPE
DRY DUST COLLECTOR
MODEL, NUMBER/SERIES
M SERIES
 SHAKER TYPE
INVERTED V-SHAPED FILTERS
 |
 |
 |
| |
HIGHLIGHTED FEATURES
 TEFC MOTOR
 100% WOVEN TYPE POLYESTER BAGS
 INVERTED V-SHAPED FILTERS
|
|
 |
GENERAL INFORMATION
PROVEN TECHNOLOGY
The Modular M Series is the ultimate solution for dust filtration of various applications without the use of any available compressed air. It is an automated, modular, shaker type, dust collector requiring minimal supervision and maintenance.
ADVANTAGES
EFFICIENT FILTER
The needle felt filter, made of 100 % polyester, supplies high efficiency filtration.
The fabric is specially treated to facilitate the removal of the dust particles.
Other types of filters fabrics are also available for special applications. The filter section consists of a number of inverted "V" shaped pockets stitched into a single filter element. The filter section is supported on the top by elastics and on the bottom by a metal frame.
FAN ASSEMBLY
The fan and motor are mounted on a vertical axis at the top of the unit. The impellor and its casing are inside the cabinet, while the motor is outside for easy maintenance. The impellor rotor blade is backward inclined, of high efficiency type and ensures maximum performance with minimal power consumption.
EASY & ECONOMIC MAINTENANCE
The modular system has a shaking mechanism that oscillates the filter frame in order to dislodge the dust build-up.
This operation prevents blockage of the filter and ensures an efficient functioning of the system.
To ensure regular cleaning of the filter element, the shaking mechanism is operated by a controller incorporating the fan starter that automatically brings the shaker motor into operation each time the fan is stopped. The 45-gallon drum is optional.
THEORY OF OPERATION
HOW THE M SERIES DUST COLLECTOR WORKS
The simple and efficient technology of the M series system integrates four main components: the cabinet, the filter section, the hopper and the dust collector bin.
Once the air enters the unit, a reduction in velocity occurs and the heavy particles fall into the dust collector’s bin. The fine dust is carried in the air stream upwards into the filter element. The air is propelled through the filter element while the dust is filtered out into the inside surface. Clean air can be recirculated or exhausted outside depending on the application.
SELECTION CRITERIA
Selection criteria of a DDT downdraft table:
- Type of dust
- Dust concentrations
- Process conditions:
- Temperature
- Humidity
- Corrosive agent advantages
- Dew point
- Physical constraints
- Duct static pressure
CHARACTERISTICS AND OPTIONS
APPLICATIONS
Designed for medium applications
- Wood
- Metal
- Plastic
- Cement
- Etc
STANDARD CHARACTERISTICS AND FEATURES
- Capacity from 500 to 1 500 cfm
- 100% woven type polyester bags
- Industrial radial type fan
- TEFC Motor
- 12 gauge steel construction
Electrical equipment:
The shaker motors are normally supplied for single (120V) or three (600V) phase voltages. Fan motors are TEFC (Totally Enclosed and Fan Cooled.) and vary in size from 2 HP to 15 HP.
OPTIONS
- The shaker motors are ½ HP or ¾ HP.
- Silencer
- Weatherproof Protection
- Explosion-proof door and motor
- Various air inlet positions
- Automatic shake
- Automatic shaking mechanism (Optional on M-10 to M-32 models)
- Remote control panel
|
|
|
